License plate bracket?

[caniserre]

Does anyone know where I could get a license plate bracket that would fit here:



The one that the lady had on before me must have fallen off on the ride home derp. Where could I buy a bracket for decently cheap (and best case scenario near-ish the USF area)? I would like to pick one up before I work tomorrow at 12 (on two wheels, weather permitting).

I kinda don't want to ride around without my tag displayed....

[HammieL]

I use zip ties =p

[RockstarNutCase]

I have a license plate frame if thats what u mean that u can have if u come get it... Still in original packaging.. never got around to putting it on..

[Gulfripper]

[Gremlin]

Cycle Gear, Florida & Fletcher.

[Little R6]

A piece of aluminum, some 1/4x20 bolts & a drill! Just don't for get to get a light for the plate.

[ianjoub]

2" or 3" shelf brackets fom a hardware store are cheap and work well.

[Lilwoman]

A piece of aluminum, some 1/4x20 bolts & a drill! Just don't for get to get a light for the plate.

That's what is done with my bike.

[ianjoub]

A piece of aluminum, some 1/4x20 bolts & a drill! Just don't for get to get a light for the plate.

Watch out for the ECM when drilling :lol:

[Stricken]

2" or 3" shelf brackets fom a hardware store are cheap and work well.

+1

[Toddfather]

2" or 3" shelf brackets fom a hardware store are cheap and work well.

That's what is done with my bike.

+1

works well

[TriumphChris675]

i can have one made at my shop, just need the dimension of hole location, oh and it will be from stainless steel so not to rust

[caniserre]

Alright, I'll smuggle some zip ties from work and see if I can fanangle somethin' the next time I get a chance. I threw out my back this morning (derp), so it will be a while before I can walk like a normal person. :'(

[Tonya]

My tag bracket was made from a part from the door of a corvette but you can pick one up from pretty much any bike shop.