Power Commander

[Big E]

I got a power commander for my GSXR-1000, was wondering if anyone could point me in the right direction to get it installed and programed? I can install it myself, but don't have a laptop to do the programming. I'm looking for suggestions.

[DeltaNu1142]

Great buy--I haven't heard ANY complaints about this lil' bit of tuning for the guys that have put it on their S bikes... anyway, I've got a laptop if you don't want to drive your Gixxer through the front window of a Kinko's.

Looks like you can go to the Power Commander website (http://powercommander.com/) for software & maps.

[Big Red]

i just went and bought a long cable from compusa and ran it out my window...lol

[SloDown]

LOL Big Red


They make a adapter that lets you connect it to your computer and uses a 9 volt battery to run the PC while on your desktop..I have one and its outstanding...Hold up



Consumer Power Adapter
PCII/PCIII/PCIIIr
(9v) Power Programming Module
Part Number 66116001


http://www.powercommander.com/buynowacc.shtml

[Azazel]

+1 on the 9v adapter.... I have one you can even borrow if you don't want to make the purchase

[moke]

chad at kinetics....period!!! if you simply down load a generic map you get a map the whole world has! chad can make a custom map NO ONE HAS!

[tampabusa]

chad at kinetics....period!!! if you simply down load a generic map you get a map the whole world has! chad can make a custom map NO ONE HAS!


OK ... seeing how this in my progression .... what is "kinetics" ...??? where ??? who ????

[Big E]

Moke can you send me the info too contact chad? Does he have fare rates?

[Lenny J]

:+1 to what Moke said on Chad.

I was there this past weekend to have him do the suspension on my bike and spoke to him a bit about it because I need to replace the PCII in my RC with the PCIII USB.

Very good prices.

I'll PM you.

[SloDown]

Just a heads up custom maps are not cheap...I would say around 150-200 bones am I right Moke?

He is right custom is the way to go if you want the maximum performance out of your PC...But..BUT make sure you have all your aftermarket goodies on there (slipon, full exhaust, air filter, big bore kit etc etc) that deals with performance on before getting a custom map. If you do it after, guess what, gotta get your custom map customized

[SloDown]

OK ... seeing how this in my progression .... what is "kinetics" ...??? where ??? who ????

Kinetic Motor Sports (http://www.google.com/maps?hl=en&lr=&q=kinetic+motorsports&near=Hudson,+FL&radius=0.0&latlng=28364167,-82693611,8850447828515132778&sa=X&oi=local&ct=authority)
maps.google.com
12635 Us Highway 19
Hudson, FL 34667
(727) 868-9400

Ask (http://www.google.com/maps?hl=en&lr=&q=kinetic+motorsports&near=Hudson,+FL&cid=0,0,8850447828515132778&ll=28.340841,-82.699323&spn=0,.02&iwstate1=form:to&iwloc=A&f=d&daddr=12635+Us+Highway+19,+Hudson,+FL+34667,+USA&sa=X&oi=local&ct=directions-to) for Chad

[The_Jarhead]

Moke can you send me the info too contact chad? Does he have fare rates?
Chad is a member here.
http://www.tampasportbikes.com/forum/member.php?u=723

[moke]

Just a heads up custom maps are not cheap...I would say around 150-200 bones am I right Moke?

He is right custom is the way to go if you want the maximum performance out of your PC...But..BUT make sure you have all your aftermarket goodies on there (slipon, full exhaust, air filter, big bore kit etc etc) that deals with performance on before getting a custom map. If you do it after, guess what, gotta get your custom map customized

YES NOT CHEAP BUT WORTH EVERY PENNY, WHEN GUYS ON THE SAME YR MODEL CANT CATCH YA! ALSO MAKE SURE YOU DO A STOCK RUN WITH NOTHING INSTALLED FIRST THEN HAVE HIM RUN IT AFTER INSTALLING EACH PART. I.E EXHAUST RUN IT, PC RUN IT AGAIN, AIR FILTER RUN IT AGAIN. THAT WAY YOU KNOW WHAT EACH PART GAVE YOU AS FAR AS HP!

[NewTampaGSXR]

i just went and bought a long cable from compusa and ran it out my window...lol

You're killin' me!!!:crackup:

[Big E]

Thanks for the info. I already have the pipe and air filter on. Just need to get the Commander on!!! I will be calling chad after christmas.

[tampabusa]

Kinetic Motor Sports (http://www.google.com/maps?hl=en&lr=&q=kinetic+motorsports&near=Hudson,+FL&radius=0.0&latlng=28364167,-82693611,8850447828515132778&sa=X&oi=local&ct=authority)
maps.google.com
12635 Us Highway 19
Hudson, FL 34667
(727) 868-9400

Ask (http://www.google.com/maps?hl=en&lr=&q=kinetic+motorsports&near=Hudson,+FL&cid=0,0,8850447828515132778&ll=28.340841,-82.699323&spn=0,.02&iwstate1=form:to&iwloc=A&f=d&daddr=12635+Us+Highway+19,+Hudson,+FL+34667,+USA&sa=X&oi=local&ct=directions-to) for Chad





once again .... slo comes thru !

[Jgennaro]

chad at kinetics....period!!! if you simply down load a generic map you get a map the whole world has! chad can make a custom map NO ONE HAS!

Yep......:+1

Custom map IS the way to go!

Not only for HP but also smooth acceleration. The custom map done by a trained mechanic will allow you to maximize your machine. It's well worth $150. Chad does an excellent job. Go for it bro.

[moke]

Great point Jgennaro!
The biggest gain youll ever get out of installing an exhaust and a pc or(jet kit if carbs) is off idle throttle response. Which means in a drag race style start, its going to pull harder than poppy all the way to the celien. If done properly.the launch that is!
That is why I preach alot about NOT going with just a slipon and no pc. Your short changing yourself if you dont install a pc and do it right. Have it done on a dyno, pay a professional to do it right! One time! All or nothing!?

[Big Red]

You're killin' me!!!:crackup:
figured u guys would like that...:)
+1 on kinetic